Nail-free Construction Steps

In order to ensure the quality of the product, it is recommended that the customer clean the surface before use, free of dust, grease, water and moisture; at the same time, it is necessary to ensure that one of the sides is made of absorbent material and solid to ensure the paste effect.

1) Cut the nozzle above the thread line to achieve the desired size and angle (about 6mm);

2) Extrude one or two continuous adhesive strips on the back side to be pasted.

3) Glue the material to be pasted for at least 2 minutes;

4) Wipe off the spilled glue with a damp cloth;

5) Depending on the base layer, certain supports or fixtures are still needed when gluing heavy objects.