How To Choose Furniture Edge Banding Glue

1. The color requirements of the glue should be different. If the adherend itself has no special requirements for color, it is recommended to use yellow hot melt adhesive. Generally speaking, yellow hot melt adhesive is more viscous than white.

2. Surface treatment of the object being adhered. The surface treatment of furniture edge banding adhesive is not as strict as other adhesives, but the dust and oil on the surface of the adhesive should also be properly treated to make the hot melt adhesive play a better role in bonding.

3. Operating time. Fast operation is a major feature of hot melt adhesives. The working time of hot melt adhesive is generally about 15 seconds. With the wide application of modern production methods-assembly lines, the working time of hot melt adhesives is getting shorter and shorter, such as book binding and speaker manufacturing for hot melt adhesives. It takes about 5 seconds.

Fourth, resistance to temperature. Hot melt adhesives are sensitive to temperature. When the temperature reaches a certain level, the hot melt adhesive begins to soften. Below a certain temperature, the hot melt adhesive becomes brittle. Therefore, the temperature change of the environment where the product is selected must be fully considered when selecting the hot melt adhesive.

Five, stickiness. The viscosity of hot-melt edge banding glue is divided into early viscosity and late viscosity. Only when the early viscosity and the late viscosity are consistent can the hot melt adhesive and the substrate remain stable. In the production process of hot melt adhesive, it should be ensured that it has resistance to oxidation, halogen resistance, acid and alkali resistance and plasticity. Depending on the material to be bonded, the viscosity of the hot melt adhesive is also different. Therefore, different hot melt adhesives should be selected according to different materials.