Instructions for use of nail-free glue

Clean the construction surface to ensure that there is no oil or dust.

Cut the nozzle, install the nozzle, and squeeze out with a sealed gun.

Bonding method of load-bearing materials:

It can directly bond load-bearing materials. First bond the load-bearing materials together, and then separate them, wait for about 5 minutes to dry, and then firmly press and knock the materials to be bonded into place. It can be supported by bracing when necessary. (Heavy materials must be supported)

Dry bonding method: (ceiling, skirting, door frame, background wall)

1. Extrude "Zigzag" adhesive along the bonding surface.

2. Squeeze the glued side to the side to be glued, and press both sides tightly.

3. Pull the two bonding surfaces apart and let the liquid nail super glue volatilize for 2-5 minutes.

After 4.2-5 minutes, press again and tap lightly along the joint.

5. Temporarily fix the adhesive with auxiliary tools for 24 hours and then cancel the auxiliary fixation.

6. The best bonding effect can be achieved within 24 hours, and it will be fully cured within 2-3 days.

Wet bonding method: (larger materials such as wooden floors, marble countertops, etc.)

1. Apply liquid nail super glue according to dry bonding method.

2. Press the bonding surface tightly, the best bonding effect can be achieved within 24 hours, and it will be fully cured within 2-3 days.

Quick-adhesive liquid nails have ultra-fast adhesion, especially on the surface of Duoye, the effect is more significant, as long as any surface has a multi-vacancy structure, it can achieve a fast bonding effect, without any auxiliary device during the bonding process.